Avex designs, fabricates and installs custom metal pieces for residential and commercial spaces.

Avex specializes in the installation of stainless steel counter tops.

These custom pieces are designed and measured to fit precisely over existing counter tops, which are then used as a base for the stainless steel tops.

This seamless process of cladding over existing counter tops allows for an updated look without the demolition, mess and time involved in removing old counter tops.


50% down at time of field measurements
50% balance at time of installation



Steps in the process for Residential tops

  1. Substrate
    residential, wood usually 1 1/2″ thick. Installed prior to field visit
  2. Type of Back splash
  3. Sink/ Range cutouts
    Cut outs and equipment to be placed in prior to field visit
  4. Verify finish #4 polished or Multi directional, samples can be provided.
  5. Field visit to precisely measure proper allowances
  6. Fabrication, approximately two weeks
  7. Installation
    Sinks or equipment to be removed prior to scheduled installation date.
    2 to 3 hours install window on average size kitchen.


Below is a checklist of items we verify prior to fabrication

  • Application design
  • Legs/frame design
  • Material classification T304/T316
  • Adjustable height or fixed
  • Integral sink
  • Marine edge
  • Rounded corners
  • Sanitary welding